Table of Contents
Advertisement
CONFIGURE
Post-Process Stop
Criteria
Config...\Survey Settings...
Description of fields
The parameters shown on this screen depend on the setting for <STOP Criteria:> in
CONFIGURE Point Occupation Settings.
Field
Option
<Time at Point:>
User input
<Number of Obs:> User input
CONT (F1)
Description
Sets the required observation time for each point.
Counting time starts when OCUPY (F1) is pressed.
The receiver stops measuring when the set length of
time is reached.
Sets the required number of observations that should
be recorded at each point. Counting observations
starts when OCUPY (F1) is pressed. The receiver
stops measuring when the set number of observa-
tions is reached.
GPS1200+
To accept changes and to return to
CONFIGURE Point Occupation
Settings
.
415
Advertisement
Table of Contents
