38.4.2
Description
COGO
Inverse Point - Line
The direction, the distance and the coordinate differences between a known point and a
given line can be calculated depending on the data available for the known points. Points
with full coordinate triplets, position only points and height only points can be used.
Elements that must be known are
•
coordinates of two points and an offset point.
OR
•
coordinates of one point and an offset point
•
bearing and distance from one point
The coordinates of the known points
•
may be taken from the active job.
•
may be measured during the COGO calculation.
•
may be entered.
GPS1200+
808