Configuring A Cdma Connection - Leica GPS1200+ Technical Reference Manual

24.1.3
Configure CDMA
connection step-by-
step
Config...\Interfaces... - Controlling Devices

Configuring a CDMA Connection

The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2. In CONFIGURE Interfaces highlight an interface which has a digital
cellular phone of CDMA technology attached.
3. CTRL (F4) to access CONFIGURE CDMA Connection.
4. CONFIGURE CDMA Connection
<CDMA Type:> The type of digital cellular phone highlighted when
CONFIGURE CDMA Connection was accessed.
<Station:> The digital cellular phone reference station to be dialled.
Accesses CONFIGURE Stations to Dial where new reference
stations can be created and existing reference stations can be
selected or edited.
<Number:> The number of the digital cellular phone at the selected
<Station:> as configured in CONFIGURE Stations to Dial.
<Auto CONEC:> Allows for automatic connection between the rover
and the reference when a point is occupied during a survey.
Select the digital cellular phone reference station to be dialled.
GPS1200+
Refer to
chapter
23
24.10
45.3.2,
45.3.3
601