Tilt - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Config...\Interfaces... - General

Tilt

Tilt devices are used for measuring inclinations. The data from the tilt device is logged

together with the GPS raw observations. PC based software can convert the tilt data to a

readable ASCII format, e.g. RINEX.

In addition, a binary notification message can be output through ports P1, P2, P3, RX or NET

to controlling application software. A port configured as a remote port can be used to output

the notification message. The message contains the tilt measurements obtained by the

receiver from the tilt device.

The settings on this screen define the input port and parameters for incoming tilt measure-

Select Main Menu: Config...\Interfaces.... Highlight Tilt. EDIT (F3).

This option is not available for RX1250 with SmartAntenna.