Leica GPS1200+ Technical Reference Manual page 532

CONFIGURE
Message to Send
Config...\Interfaces... - General
Description of fields
Field Option
<Output:> At Epoch
Immediately
On Point Stored
CONT (F1)
Description
The NMEA message is created at the exact epoch as
defined in <Position and Screen Update:> in
CONFIGURE Display Settings. It is sent out in the
time interval as defined in <Rate:>. With <Output
Delay:>, the output can also be delayed by a time
after this epoch. Refer to paragraph "Diagram".
The NMEA message is created as soon as the infor-
mation is available. It is sent out in the time interval as
defined in <Rate:>. Refer to paragraph "Diagram".
The NMEA message is sent on point storage.
GPS1200+
To accept changes and return to the screen
from where this screen was accessed.
532