Table of Contents
Advertisement
DET C SYS
Step 4: Check Resid-
uals
Determine Coordinate System - Normal
Next step
CALC (F1) computes the transformation and continues to DET C SYS Step 4: Check Resid-
uals. Refer to paragraph "DET C SYS Step 4: Check Residuals".
If a coordinate system to be updated contains a point that was deleted from the active job
and a new point was created in that job with the same point ID but different coordinates, the
coordinates of the old point will still be used for the calculation. Pressing EDIT (F3) to edit a
highlighted pair of matched points containing the deleted point, will overwrite the coordinates
of the old point and the coordinates of the new point will be used in the calculation.
Displays a list of the matched points used in the transformation calculation and their associ-
ated residuals.
CONT (F1)
RESLT (F3)
MORE (F5)
GPS1200+
To accept the residuals and to continue with
the subsequent screen.
To view results of the transformation.
Accesses DET C SYS Transformation
Results. Refer to "40.5 Transformation
Results".
To display information about height residuals.
967
Advertisement
Table of Contents
