CONFIGURE
Start Up & Power Down,
PIN Code page
Config...\General Settings...
Field
Option
<Set Primary:> External A,
External B or
Automatic
Next step
PAGE (F6) changes to the PIN Code page. Refer to paragraph "CONFIGURE Start Up &
Power Down, PIN Code page".
The appearance of the screen varies with the setting for <Use PIN:> when this screen is
accessed.
The softkeys are identical with those on the Power Down page. Refer to paragraph
"CONFIGURE Start Up & Power Down, Power Down page" for an explanation of softkeys.
<Use PIN: No>
No PIN code has been set before.
•
The PIN code protection can be activated. •
•
Then a PIN code can be typed in.
Description
Available for the GRX1200+ Series where batteries
can be attached to port PWR with a Y-cable. Sets the
external battery which is always used when sufficient
power is available, regardless of the status of the
other battery. Primary power sources must provide a
minimum voltage of 11.4 V.
<Use PIN: Yes>
A PIN code has been set before.
•
•
GPS1200+
The PIN code must be typed in order to
change settings on this page.
Then the PIN code protection can be
deactivated.
Or the PIN code can be changed.
470