Real-Time Rover, All-On-Pole - Option 2 - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Equipment Setup

Real-Time Rover, All-on-Pole - Option 2

The equipment setup described below is to be used for real-time rover with short periods of

use, especially where there are many obstacles such as fences.

The RX1200, with the receiver attached, is fixed to the pole grip with a holder. One connec-

tion is needed to connect the GNSS antenna to the receiver. The radio plus radio antenna

attaches to the receiver.

GNSS antenna is mounted directly using screw fitting. If using stub and adapter, proce-

dures may vary slightly.

Aluminium poles are used. They may be replaced with their carbon fibre equivalent

without any change to these instructions.

Standard radio mounted in radio housing is used throughout the instructions. Digital

cellular phones may also be used but the setup may differ slightly.