Table of Contents
Advertisement
24.9
Description
Access step-by-step
Config...\Interfaces... - Controlling Devices
Scanning Reference Stations
CONFIGURE Scan Reference Station provides information about the reference stations,
with specific types of devices attached, for example a radio, from which real-time corrections
are being received. This can also be useful for finding out if anyone else in the area is using
a particular radio channel.
Step
Description
1.
Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2.
In CONFIGURE Interfaces highlight an interface which has an
appropriate device attached.
3.
CTRL (F4) to access CONFIGURE RS232 Connection or
CONFIGURE Radio Channel.
4.
SCAN (F5) to access CONFIGURE Scan Reference Station.
GPS1200+
Refer to
chapter
23
621
Advertisement
Table of Contents
