Table of Contents
Advertisement
24.2
Description
Configure modem
connection step-by-
step
Config...\Interfaces... - Controlling Devices
Modems
For modems, information such as
•
the reference stations that can contacted and
•
the phone numbers of the reference stations
can be controlled.
Changing the reference station to be dialled is of interest in two cases.
Case 1:
Two real-time reference stations, each equipped with a digital cellular phone,
are set up at two locations belonging to different network providers.
When leaving the area of one reference, the station can be changed and the
other reference can be called.
Case 2:
Set up as in case 1.
Two separate fixes from each reference for each point can be obtained,
providing redundancy for future least squares adjustment operations.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2.
In CONFIGURE Interfaces highlight an interface which has a modem
attached.
3.
CTRL (F4) to access CONFIGURE Modem Connection.
GPS1200+
Refer to
chapter
23
604
Advertisement
Table of Contents
