Leica GPS1200+ Technical Reference Manual page 145

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Manage...\Jobs

MANAGE New Job, Avge page

In order to check measurements, the same point can be measured

more than once. If activated, an average or an absolute difference is

<Averaging Mode:> Defines the averaging principles for multiple

measured points. <Averaging Mode: Average> computes the

average for the position and the height. Points exceeding the defined

limits are marked with in MANAGE Edit Point, Mean page. <Aver-

aging Mode: Absolute Diffs> computes the absolute differences

between two points selected from a list of measured points which are

all stored with the same point ID. The selection determines the avail-

ability of the subsequent fields for setting the acceptable averaging

limits or absolute differences.

For <Averaging Mode: Average>:

<Method:> The method used for computing the average.

<Method: Weighted> calculates a weighted average while

<Method: No Weighting> is calculating an arithmetic average.

<Points to Use:> The type of points which will be taken into

account for averaging.

<Avge Limit Pos:> and <Avge Limit Ht:> The acceptable differ-

ence for the position and height components.