Editing A Point - Leica GPS1200+ Technical Reference Manual

9.3.3
Access
Edit point step-by-step
Manage...\Data

Editing a Point

Refer to "9.2 Accessing Data Management" to access MANAGE Data: Job Name.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. In MANAGE Data: Job Name, Points page highlight a point to be
edited.
2. EDIT (F3) to access MANAGE Edit Point: Point ID.
The visible pages on this screen depend on the properties of
the point being edited.
3. MANAGE Edit Point: Point ID, Coords page
It is possible to edit the point ID and for points of <Class: CTRL> and
<Class: EST> also the coordinates. Other point related data is shown
in output fields.
Points of <Class: REF> cannot be renamed.
Changing the point ID for a point of any class applies this new
point ID to all other points with the same original name, regard-
less of class.
MORE (F5) displays information about class, sub class, 3D coordi-
nate quality, time and date of when point was stored, instrument
source, source and the flag for Linework if available.
COORD (F2) views other coordinate types.
GPS1200+
Refer to
chapter
9.3.1
9.3.1
174