Table of Contents
Advertisement
38.5
38.5.1
Description
COGO
COGO Calculation - Traverse Method
Overview
Elements that must be known are
•
the coordinates of one point.
•
the direction from the known point to the COGO point.
•
the distance from the known point to the COGO point.
•
offsets, if required and configured.
The coordinates of the known point
•
may be taken from the active job.
•
may be manually occupied during the COGO calculation.
•
may be entered.
The direction from the known point to the COGO point can be an azimuth or an angle.
Points with full coordinate triplets and position only points can be used. Position only is calcu-
lated, height can be typed in.
A COGO traverse calculation can be calculated for
•
a single point.
•
multiple points. Several single points are calculated in one sequence.
•
sideshots.
GPS1200+
825
Advertisement
Table of Contents
