Survey Mode; Mapview In Survey Mode - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Survey: Job Name,

MapView Interactive Display Feature

Survey Mode

The survey mode of MapView is available as the Map page in Survey and is used to display

the positions of the reference station and the rover during a survey. It can also be used to

select lines and areas. It is also used by the Stakeout, Reference Line and Reference Plane

application programs to assist in the staking out/measuring of points.

Refer to "33.7.2 MapView in Staking Out Survey Mode" for more information about using

MapView when staking out points.

Refer to "33.2 Accessing MapView" paragraph "Example access for survey mode:".

The SURVEY Survey: Job Name, Map page is used as the example below. The functions

described are the same for all Map pages in survey mode.

The softkeys described below are specific to MapView in survey mode. Refer to "33.4.1

Softkeys" for descriptions of the standard softkeys.