Leica GPS1200+ Technical Reference Manual page 602

Config...\Interfaces... - Controlling Devices
Step Description
NEAR (F2) finds the nearest reference station with a digital cellular
phone of CDMA technology. Available when reference stations to dial
are already created in CONFIGURE Stations to Dial. Coordinates of
these stations must be known.
5. CONT (F1) returns to CONFIGURE CDMA Connection.
SHIFT CMND (F4) allows AT commands to be sent to the digital
cellular phone.
SHIFT INFO (F2) provides information about the CDMA device being
used, such as the manufacturer, the model and the electronic serial
number.
For registration purposes, send the electronic serial number to the
network provider in order to receive the service programming code
and the mobile directory number. These numbers must be typed in in
CONFIGURE CDMA Registration. All information can be printed to
a file CDMA Info.log in the \DATA directory on the CompactFlash
card.
6. SHIFT REG (F3) to access CONFIGURE CDMA Registration.
7. CONFIGURE CDMA Registration
The settings allow the CDMA digital cellular phone to be registered
over the air.
<Prog Code:> Type in the service program code provided by the
network provider.
GPS1200+
Refer to
chapter
24.10
Appendix J
602