Leica GPS1200+ Technical Reference Manual page 350

Convert...\Export Data from Job
Step Description
5. FILT (F4) to set the sort and filter settings for export. Accesses
EXPORT Sorts & Filters.
6. EXPORT Sorts & Filters, Points page
<Sort:> The order in which points, lines and areas are exported.
<Filter:> Defines which points are exported.
PAGE (F6) changes to the Lines or Areas page. The setting for
<Filter:> on these pages defines which lines or areas are exported.
7. CONT (F1) accepts the changes and returns to EXPORT Export
ASCII Data from Job.
CSYS (F6) accesses EXPORT Coordinate Systems. To update the
coordinate system in which the coordinates are exported.
8. CONT (F1) exports the data.
9. Information message: Are more data to be exported?
• If yes, continue with step 10.
• If no, continue with step 11.
10. YES (F4). Repeat steps 1. to 9.
11. NO (F6) returns to the GPS1200+ Main Menu.
GPS1200+
Refer to
chapter
9.6
13.3
350