Table of Contents
Advertisement
Config...\Interfaces... - General
Field
Option
<Device:>
Output
<End of Msg:> None, CR, LF or
CR/LF
<Data Rate:>
From 0.1s to 60.0s Available for <End of Msg: None>. The receiver
<Notify Msg:> None, ASCII or
Binary
Next step
CONT (F1) returns to the screen from where CONFIGURE ASCII Remote was accessed.
Description
The device currently assigned to the selected port
within the active configuration set.
The character to be used to identify the end of the
incoming ASCII message.
takes the ASCII data that it received from the third
party device over the defined time span and passes
them on to the PC.
Activates the output of a notification message. The
format is OWI or LB2 v2. Documentation for OWI and
LB2 is available on request from the Leica Geosys-
tems representative.
GPS1200+
570
Advertisement
Table of Contents
