Determine the antenna
height step-by-step
Antenna Heights
Sometimes, it is difficult to measure to the MRP directly.
Step
Description
1.
Determine the height difference between the pillar benchmark and a surface on the
carrier.
2.
Refer to paragraph "Carrier and adapter dimensions". Look up the height differ-
ence between this surface on the carrier and where the MRP of the antenna sits
on the carrier.
3.
Add the values determined in step 1. and 2., to get the vertical height reading.
4.
For Leica standard antennas plus accessories, the vertical offset is 0.00 m.
GPS1200+
97