24.11.2
Access step-by-step
CONFIGURE
Server to Connect
Config...\Interfaces... - Controlling Devices
Accessing CONFIGURE Server to Connect
Step
Description
1.
Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2.
In CONFIGURE Interfaces highlight an interface which has an
Internet/Ethernet interface attached.
3.
CTRL (F4) to access CONFIGURE XX Connection.
4.
Open the choicelist for <Server:> to access CONFIGURE Server to
Connect.
CONT (F1)
To select the highlighted server and to return
to the screen from where this screen was
accessed.
NEW (F2)
To create a new server. Refer to "24.11.3
Creating a New Server".
EDIT (F3)
To edit a server. Refer to "24.11.4 Editing a
Server to Connect".
GPS1200+
Refer to
chapter
23
630