Leica GPS1200+ Technical Reference Manual page 148

Manage...\Jobs
Step Description
• If no, continue with step 6.
• If yes, continue with step 8.
6. No codes are stored in the job.
MANAGE Edit Job: Job Name, Codelist page
<Codelist: <None>> This default setting can be changed. Choosing
a codelist copies the codes to the job. All codelists from Main Menu:
Manage...\Codelists can be selected.
7. PAGE (F6) changes to the Coord System page. Continue with step
10.
8. Codes are stored in the job.
MANAGE Edit Job: Job Name, Codelist page
<Codelist:> If codes had been copied from a System RAM codelist,
the name of the codelist is displayed. If codes have been typed in,
then the name of the active job is displayed.
IMPRT (F2) adds additional codes from a new codelist to the job. The
name of this codelist is copied to the job.
SHIFT EXPRT (F2) copies codes from the job to an existing or new
codelist.
CODES (F4) views codes currently stored in the job.
9. PAGE (F6) changes to the Coord System page.
10. MANAGE Edit Job: Job Name, Coord System page
GPS1200+
Refer to
chapter
11
10
10
8.5
148