Table of Contents
Advertisement
1.4
Use
Description
Equipment Setup
Post-Processed Kinematic, Pole and Minipack
The equipment setup described below is to be used for post-processed kinematic rover
surveys with extended periods of use in the field.
The receiver is placed in the minipack. Connections are made to the GNSS antenna and the
RX1200.
•
GNSS antenna is mounted directly using screw fitting. If using stub and adapter, proce-
dures may vary slightly.
•
Aluminium poles are used. They may be replaced with their carbon fibre equivalent
without any change to these instructions.
GPS1200+
39
Advertisement
Table of Contents
