Internet / Ethernet - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Requirements

Config...\Interfaces... - Controlling Devices

Internet / Ethernet

The Internet connection and the Ethernet connection is available on the GRX1200+ and

GRX1200+ GNSS.

The Internet connection allows for the GPS1200+ receivers except

GRX1200+/GRX1200+ GNSS to be connected to the Internet to receive real-time data. A

GPRS / Internet device must be attached to the receiver.

The Ethernet connection allows for the GRX1200+/GRX1200+ GNSS to be connected to the

Internet/intranet for remote access. The Ethernet device resides inside the

GRX1200+/GRX1200+ GNSS and is connected to the intranet/Internet via the port NET on

the receiver. The physical port NET is divided into three logical NET ports NET1, NET2 and

NET3 which can each be configured separately. IP address ranges can be defined to prevent

users with an IP address outside these ranges from accessing the receiver.

For Internet

<Internet:> in CONFIGURE Internet Interface.

<Port: NETx> in CONFIGURE Real-Time Mode