Creating A New Code - Leica GPS1200+ Technical Reference Manual

10.5.2
Create a new code step-
by-step
Manage...\Codelists

Creating a New Code

The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "10.5.1 Accessing MANAGE Codes" to access MANAGE
Codes.
2. NEW (F2) to access MANAGE New Code.
3. MANAGE New Code
<Code:> A unique name for the new code. The name may be up to
16 characters long and may include spaces. Input required.
<Code Desc:> A detailed description of the code. This can be for
example the full designation if <Code:> is an abbreviation. Input
optional.
<Group:> The code group to which the code is to be assigned. All
code groups from MANAGE Code Groups can be selected.
<Code Type:> Defines the use of the code. It can be used as themat-
ical code for points, lines or areas or as a free code.
<Linework:> Only available for <Code Type: Point>. This field
contains a choicelist, to allow a new line or new area to be opened
whenever the point code is newly selected. This functionality is also
available when creating codelists with LGO Codelist Management.
GPS1200+
Refer to
chapter
10.1
10.1
227