Table of Contents
Advertisement
Config...\Interfaces... - General
Field
Option
Yes or No
<Limit:>
User input
<Notify Msg:> None, Binary or
ASCII
Next step
IF port and device for a
notification message
are not to be configured
are to be configured
Description
Activates the observation of the time accuracy limit
within which pulses shall be generated.
Available for <Limit Error: Yes>. The time accuracy
limit in nanoseconds.
Activates the output of a notification message with
each PPS output. Refer to "Appendix I PPS Output
Notify Message Format" for information on the
message format.
THEN
CONT (F1) closes the screen and returns to the screen from
where CONFIGURE PPS Output was accessed.
NPORT (F4). Refer to "22.16 Remote".
GPS1200+
561
Advertisement
Table of Contents
