Leica GPS1200+ Technical Reference Manual page 256

Coding
Field Option
Linework
<Measure Yes or No
Point:>
<String Choicelist
Attrib:>
<Method:>
Not used
Zig-Zag
Same direction
Description
The linework flag to be stored with the point. The
options available depend on whether a line/area is
currently open. Refer to "12.2 Performing Linework"
for an explanation of the options that become avail-
able in SURVEY Survey: Job name, SCode page.
If one of the code boxes is tapped in SURVEY
Survey: Job name, SCode page then that code is
selected and the point is measured for <Measure
Point:Yes>.
Available for <Show Codes: All Codes>.
When this field is active, surveyed points that have
the same code attached are strung to one line.
Refer to "19.3 Coding & Linework".
Method by which subsequent code box is selected
after a point is stored.
<Direction:> and <No. Elements:> are invisible and
the number of codes boxes shown in SURVEY
Survey: Job name, SCode page is nine.
Each new code block is started at the same end as
where the previous code block finished.
Each new code block is started at the same end as
where the previous code block started.
Refer to "48.1 Overview" for <Method: Zig-Zag> or
<Method: Same direction>.
GPS1200+ 256