Table of Contents
Advertisement
Linework
Step
Field
2.
<Code Type:> Point is displayed. This field is an output field. It can not be
3.
<Linework:>
4.
-
5.
-
6.
-
-
-
-
-
Description for thematical coding
With codelist
changed.
Select an option for the Linework flag to be stored with the point.
Refer to "12.2 Performing Linework" for a description of the
options.
Select ----- to store a point without Linework flag or to perform
coding without Linework.
OCUPY (F1)
STOP (F1)
STORE (F1)
•
The point is stored with the selected code.
•
Depending on the selection for <Linework:>, a line/area is
opened/closed.
•
An open line/area is closed when the selection for <Line-
work:> was not changed but
• the selection for <Code:> was changed.
• the same code was re-selected, for example by using the
right/left arrow key.
•
The options available for <Linework:> are updated.
GPS1200+
Without codelist
277
Advertisement
Table of Contents
