Importing Data In Dxf Format - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

Requirements

Import data step-by-

Convert...\Import Data to Job

Importing Data in DXF Format

At least one file in DXF format with the file extension *.dxf has to be stored in the \DATA direc-

tory of the CompactFlash card.

Refer to "17.2 Accessing the Data Import Functionality" to access DXF IMPORT Import DXF

Data to Job.

DXF IMPORT Import DXF Data to Job

<From File:> All files with extension *.dxf in the \DATA directory on the Compact-

Flash card can be selected.

<To Job:> Choosing a job as destination for import makes this job the active job.

All jobs from Main Menu: Manage...\Jobs can be selected.

CONF (F2) accesses Configuration.

<Block Prefix:> Optional prefix to imported blocks.

<Point Prefix:> Optional prefix to imported points.

<Line Prefix:> Optional prefix to imported lines.

<File Units:> Choosing the unit for the DXF data to be imported.

<Create Vertex Points:> Option if points will be created at vertices of the imported

line/arc/polyline elements.

<Convrt White Elements:> Option if white colored elements will be converted to

black colored elements.