Leica GPS1200+ Technical Reference Manual page 599

Config...\Interfaces... - Controlling Devices
Step Description
<Station:> The digital cellular phone reference station to be dialled.
Opening the choicelist accesses CONFIGURE Stations to Dial
where new reference stations can be created and existing reference
stations can be selected or edited.
<Number:> The number of the digital cellular phone at the selected
<Station:> as configured in CONFIGURE Stations to Dial.
<Protocol:> The configured protocol of the digital cellular phone at
the selected <Station:> as configured in CONFIGURE Stations to
Dial.
<Auto CONEC:> Allows for automatic connection between the rover
and the reference when a point is occupied during a survey.
<Net Data Rate:> The network baud rate. Select Autobauding for
an automatic search of the network baud rate. For digital cellular
phones of GSM technology that do not support autobauding choose
the baud rate from the choicelist.
<Connection:> Define if the digital cellular phone uses Radio Link
Protocol. Select Non-Transparent for digital cellular phones that use
RLP. For digital cellular phones that do not use RLP select Trans-
parent. Check with the network provider if the digital cellular phone
uses RLP.
Select the digital cellular phone reference station to be dialled.
GPS1200+
Refer to
chapter
24.10
45.3.2,
45.3.3
599