Table of Contents
Advertisement
DET C SYS
Configuration,
Classic 3D page
Determine Coordinate System - General
Field
Option
Two WGS84
Points
<Default
Scale:>
User Entered
Compute CSF
<Deflt Grid
User Entered or
SF:>
Known Local Pt
<Deflt Ht SF:> User Entered,
Known Local Pt or
Known Local Ht
Next step
PAGE (F6) changes to the Classic 3D page. Refer to paragraph "DET C SYS Configuration,
Classic 3D page".
Description of fields
Field
Option
<Default Local
Use WGS84 Pt Ht
Height:>
or Use Local Pt Ht
Description
Rotation defined by two points on the WGS 1984
datum. Refer to "41.2 Determine Coordinate System
- Onestep Transformation" paragraph "DET C SYS
Step 4: Determine Rotation" for a diagram.
The default method for determining the scale factor to
be used in the transformation process.
Scale factor can be manually typed in
Compute the combined grid and height scale factor.
Available for <Default Scale: Compute CFS>.
Default method for computing the grid scale factor of
the known point.
Available for <Default Scale: Compute CFS>.
Default method for computing the height scale factor
of the known point.
Description
Source of height information to use.
GPS1200+
957
Advertisement
Table of Contents
