Time - Mode And Format Control - Leica MX400 Operating Instructions Manual

Operator's Manual
you must get from the speed log manufacturer. When the speed
log moves, you can view the Log speed in the lower window.
The value displayed in this lower window should change with
the speed log.
Log Input Filter: This input provides the ability for the user to enter
a constant filter or smoothing value in seconds. This value is
used when you don't want to see the instantaneous changes in
speed, rather speed averaged over a period of time.
Log Input Bias: This input provides the ability for the user to enter
a constant correction value for the speed log.
Log Output Pulses: This is the calibrated pulses per nautical mile
that you want to output to other equipment such as radars and
ARPAs. This value is typically 200 pulse per nautical mile.
Lower Window: This window is provided so that you can see the
real time gyro and speed log inputs, as well as the real time
speed over ground output (to compare with on the ARPA).

Time - Mode And Format Control

This menu item sets the method in which time is displayed on the
receiver.
Time System: Sets the time to UTC (default) or Local. When Local
is selected, several parameters associated with local time are
displayed.
Time Format: Sets the time to either a 24 Hour (default) or 12 Hour
clock.
152
Configuration
Version 3.3