Data Storage Concept - Leica iCON gps 70 User Manual

☞
2.2.3
Description
Memory device
☞
☞
18
Model Power supply
10.5 V‑28 V DC power supply via a converter cable supplied
by Leica Geosystems, or
110 V/240 V AC to 12 V DC power supply unit, supplied by
Leica Geosystems.
For permanent operations use Uninterruptible Power Supply units as a back-
up in a main power failure.

Data Storage Concept

A special debug.def file is needed to record Leica GNSS raw data on the SD
card. Recording Leica GNSS raw data by a controller is not supported.
Internal The iCON gps 70 GNSS instrument has an internal memory.
memory: Available capacity: Up to 4 GB
SD card: The iCON gps 70 GNSS instrument has an SD card slot fitted as
standard. An SD card can be inserted and removed.
Available capacity: 1 GB, 8 GB
☞
While other SD cards can be used, Leica Geosystems recommends
to only use Leica industrial grade SD cards and is not responsible
for data loss or any other error that can occur while using a
non-Leica card.
Unplugging connecting cables, removing the data storage device or interrupt-
ing the power supply during the measurement can cause loss of data. Only
remove the data storage device, unplug connecting cables or interrupt the
power supply when the iCON gps 70 instrument is switched off.
SD cards can directly be used in an OMNI drive as supplied by Leica Geosys-
tems. Other PC card drives can require an adaptor.
Description of the System