Receiver Components; On/Off Button - Leica GPS1200 Series User Manual

2.4

Receiver Components

Receiver compo-
nents

ON/OFF button

Description of the System
a
b
c
d
e
f
GPS12_134
The receiver can be preprogrammed in the office and used in the field without the
RX1200 attached. In this case, the receiver is turned on by holding down the
ON/OFF button for 2 s or off by holding down the ON/OFF button for 4 s. A green
steady light at the power LED indicates that the receiver is turned on.
a) RX1200
b) Supplied stylus
c) Clip-on-contacts for connecting
d) Recess for RX1200
e) Guide rail for clip-on-housing of a
g
f)
h
g) LED indicators
i
h) Battery compartment 2 or port NET
j
i)
j)
GPS1200
RX1200 without cable
device
ON/OFF button
Battery compartment 1
CompactFlash card compartment
25