Wpt & Rte Input - Uploading Waypoints Into The Receiver - Leica apMK12 Operation & Installation Manual

Operation & Installation Manual
Wpt & Rte Input - Uploading Waypoints into the Receiver
128
128
This screen enables the input data port to receive waypoints and routes
from a chart plotter, PC, or other device to the receiver. You can re-
ceive this data through any of the 4 NMEA 0183 input data ports.
Load the WPL sentences first, then the RTE sentences. Change Trans-
ducer Connected from No (default) to Yes and select the appropriate
port. Refer to the Waypoints - Uploading Waypoints from Other De-
vices section of this manual for more details on the software interface.
Refer to the Installation Section of this Manual for hardware inter-
faces.
Configuration
Version 1.5
8/13/01, 11:07 AM