Table of Contents
Advertisement
Replacing the Feed Roller
After replacing the feed roller for the tray 1, clean the feed roller inside the printer. For
information on how to clean the feed roller, refer to "Cleaning the Feed Roller" (P. 172).
Replacement Procedure
Use the following procedure to replace the feed roller for the tray 1.
1.
Pull the tray 1 out of the printer.
2.
Remove all the paper from the tray 1.
3.
While pushing the feed roller by the tabs at
both ends in the inward directions, pull the
roller out of the groove in the axle.
4.
Align the new feed roller to the groove in
the axle.
7.1 Replacing Consumables
135
Advertisement
Table of Contents
