Local Survivable Processor - Avaya Communication Manager Administrator's Manual

Screen Reference

Local Survivable Processor

If the primary server has Local Survivable Processors (LSPs), you must enter the LSP node
names on the Local Survivable Processor screen to enable the LSPs to get translations
updates from the primary controller. Once the LSPs are successfully entered on the Local
Survivable Processor screen, their status can be viewed with the display lsp command.
Figure 466: Local Survivable Processor screen
change lsp
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Number
Valid entries
1 to 250
Name
Valid entries
values from
Node Names
screen.
1224 Administrator Guide for Avaya Communication Manager
LOCAL SURVIVABLE PROCESSOR
Name IP Address
LSPNYC ________128.256.173.101
LSPCHI ________128.256.113.213
LSPLAX _________156.256.114.214
LSPPHL _________128.213.234.34
LSPPHL2_________128.256.213.12
LSPPHL3_________128.256.173.14
LSPORD _________128.256.173.244
LSPORD1_________128.256.173.232
LSPORD2_________128.256.173.222
LSPORD3 ________ 128.256.173.111
LSPMIA _________128.123.173.333
LSPDET__________128.222.173.211
LSPEWJ__________128.134.173.233
LSPBOS__________128.174.173.111
LSPDCA__________128.237.173.222
LSPDEN__________128.256.173.313
Usage
The number of the LSP.
Usage
Enter the node name for each LSP supported by the
primary controller. Default is blank.
Page
Service Translations
State Updated
in-service/idle 03:21 02/19/03
out-of-service 04:32 02/20/03
in-service/idle 05:43 03/19/03
in-service/idle 03:54 12/19/03
in-service/idle 06:24 11/23/03
in-service/idle 07:13 05/19/02
in-service/idle 13:25 02/19/03
in-service/idle 23:39 12/19/03
out-of-service 21:33 12/19/03
out-of-service 12:27 05/19/03
out-of-service 22:18 10/19/03
out-of-service 23:31 12/19/03
in-service/busy 23:45 06/19/03
in-service/busy 13:11 08/19/03
in-service/busy 13:46 12/19/03
in-service/busy 04:15 11/
1 of 16