How A Conferee Is Placed In A Conference; Dialing Out To Conferees; Conferee Dial In - Avaya CS700 Administration And Maintenance
Exchange 5.1
Hide thumbs
Also See for CS700:
- Administration and maintenance (396 pages) ,
- Installing instructions (98 pages)
Table of Contents
Advertisement
System Features
automatically disconnected. In addition, you can run a conference that is unattended except for
an operator initiated blast dial.
The system also permits combinations of certain modes. For example, the moderator of an
attended dial-in conference can ask an operator to dial out to a conferee who has not dialed in.
How a Conferee Is Placed in a Conference
Conferees gain access to conferences in eight different ways.
Five ways involve dial-outs from the system to the conferee.
●
Three ways involve dial-ins from conferees to the system.
●
Dialing Out to Conferees
There are different ways for operators and moderators to dial out to a participant:
Operator Dial Out
Immediate — An operator manually dials a phone number directly from the keyboard.
●
Fastdial — An operator dials participants from a list stored on the system.
●
Blast Direct — An operator has the system simultaneously dial an entire list of numbers.
●
Conferees are automatically placed in the conference after they answer the call and enter
a "1."
Blast Direct to Conference—An operator invokes the system's blast dial feature to
●
simultaneously dial an entire list of numbers. The system places answered lines directly
into a conference.
Blast Coded — An operator invokes the system's blast dial feature to simultaneously dial
●
an entire list of numbers. The system prompts conferees for a conference passcode,
before the system places them in the conference.
Moderator Dial Out
Originator Dial Out (ODO) — A moderator dials out to a conferee during the conference.
●
Automatic Blast—As soon as the moderator joins the conference, the system dials a pre-
●
configured blast list.
Manual Blast—A moderator initiates dialout to a preconfigured list using DTMF
●
commands.
Conferee Dial In
The system provides three methods of processing conferee calls to the system:
26 Administration and Maintenance of the S700/780 Audio Conferencing Server
Advertisement
Table of Contents
