Local Monitor/Mouse/Keyboard; Ras (Modem) Dial Up - Avaya DEFINITY ONE Installation And Upgrades

Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10 555-233-109
2 Connectivity and Access to DEFINITY ONE or IP600
Creating physical connections
5. Click OK. The following dialog box displays, prompting for login and
password information:
6. Click OK.
A DEFINITY ONE or IP600 drive is mapped to the laptop's CD-ROM drive.

Local monitor/mouse/keyboard

Use this method when plugging the monitor into DEFINITY ONE or IP600, thus
making it look like a PC. The processor interface cable is on slot 2 of DEFINITY
ONE or IP600. Customers have their own monitor/mouse/keyboard setup.
1. Plug the monitor into the processor interface cable on the back of
DEFINITY ONE or IP600.
2. Plug the mouse into the processor interface cable on the back of DEFINITY
ONE or IP600.
3. Plug the keyboard into the processor interface cable on the back of
DEFINITY ONE or IP600.
NOTE:
If these devices are plugged in while the system is running, you must reboot
so that the system will recognize these peripherals. Once recognized by the
system, the devices are hot pluggable.

RAS (modem) dial up

The RAS dial-up connection method enables Avaya services-related personnel,
INADS, or customers to dial in remotely using a modem. On DEFINITY ONE or
IP600, the Windows 95 or Windows 2000 Remote Access Service (RAS) is
listening for incoming calls from COM1, to which a modem is connected. Use the
standard Windows 95 dial-up networking operation to set up this connection from
a Services laptop computer as per the following procedure.
NOTE:
In Windows 2000, use the Make a New Connection Wizard to
complete this procedure. Just follow the on-screen instructions.
Issue 6
December 2001
2-19