Finding A Member In One Or More Zones; Finding A Zone Member In The Potential Member List - Brocade Communications Systems WFT-2D User Manual

3. Select a zone database that you have checked out (your user name is in the Current User
4. Select Undo CheckOut from the Zone DB Operation list.
5. Click Yes in the confirmation message.
6. Click OK to save your work and close the Zoning dialog box.

Finding a member in one or more zones

Use this procedure to locate all instances of a member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. If you want to show all fabrics discovered in the Potential Members list, right-click in the
5. Select the devices or ports you want to find in the Potential Members list.
6. Click Find > between the Potential Members list and the Zones list.

Finding a zone member in the potential member list

Use this procedure to locate a zone member in the Potential Members list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select the zone member in the Zones list that you want to find in the Potential Members list.
5. Click Find < between the Potential Members list and the Zones list.
Brocade Network Advisor SAN User Manual
53-1003154-01
column) in the Zone DB list.
This removes the user names of users currently logged in to the client from the Current User
column for this zone database.
Any zones or zone configurations you have changed are saved in the zone database.
For LSAN zones, select Configure > Zoning > LSAN Zoning (Device Sharing).
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Potential Members list and select Display All.
If the member is found, all instances of the zone member found are highlighted in the Zones
list.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
(Press SHIFT or CTRL and click each zone member to select more than one zone member.)
If the member is found, it is highlighted in the Potential Members list.
Zoning administration
21
927