Brocade Communications Systems StoreFabric SN6500B User Manual page 1284

H
Database tables and fields
TABLE 157
Field
MTU
PATH_TOV
SCSI_QUEUE_DEPTH
STATE
SUPPORTED_CLASS
TRL_SPEED
TRL_STATE
PG_ID
PRIORITIES
FCOE_MAC
IOC_ID
TABLE 158
Field
ID
SYMBOLIC_NAME
PORT_WWN
NODE_WWN
NAME
FC_ADDRESS
FRAME_DATA_SIZE
SPEED
1236
HBA_PORT_FCOE_DETAILS (Continued)
Definition
Maximum transmission unit in bytes of the FCoE port.
Default - 2112, 0 - auto
The value between 0 and 60 that specifies the
time-out session.
NOTE: You can only enable or edit the path time out
when MPIO is disabled
The LUN queue depth feature determines how many
concurrent IOs the adapter will accept and process
per LUN (not at the adapter port level, as with the IO
throttle value). Not setting the queue depth to the
optimal level can result in poor performance, where
outstanding IO queuing can cause bottlenecks. For
optimum performance, consider both the
configuration settings of the HBA and the physical
limits on the storage array. If you set the queue depth
too low on the HBA it could lead to under-utilization of
storage resources.
NOTE: The Queue Depth feature is supported for all
adapter classes configured in FC or FCoE
mode (Windows operating systems only)'
The state of the FCoE port (online or offline).
The classes supported on the FCoE port.
For example, Class2 and Class3.
TRL (Target Rate limit) speed. This will be less than
max speed supported by this port.
TRL (Target Rate limit) state of the port. Possible
values are 0 - disable , 1 - Enable
The priority group ID. Possible values are 0-7
(user-definable) and 15.0-15.7 (strict priority).
'Lists the available priorities (High, Medium, Low).
FCOE MAC address of the port.
The IO controller Identifier.
HBA_REMOTE_PORT
Definition
Autogenerate primary column.
The symbolic name associated with the remote port.
The world wide name of the remote device''s port.
The world wide name of the remote device
The name associated with the device
FC Address for the port in hex
The frame size, in bytes, of the device.
The default value is 512.
Operating speed of the remote port.
Format
int
int
int
varchar
varchar
int
smallint
varchar
varchar
varchar
int
Format
int
varchar
char
char
varchar
varchar
int
int
Brocade Network Advisor SAN User Manual
53-1002696-01
Size
64
256
32
128
64
Size
256
23
23
256
6