Syslog Troubleshooting; Finding The Process; Stopping The Process - Brocade Communications Systems StoreFabric SN6500B Installation Manual

Syslog troubleshooting

If the default syslog port number is already in use, you will not receive any syslog messages from
the device. Use one of the following procedures (depending on your operating system), to
determine which process is running on the syslog port and to stop the process.

Finding the process

1. Open a command window.
2. Choose one of the following options:

Stopping the process

Choose one of the following options:
Network Advisor Installation and Migration Guide
53-1002699-01
•
On Linux systems, type netstat –nap | grep 514 and press Enter.
The process running on port 514 displays.
Example output: UDP 0 0 ::ffff:127:0:0:1:514 :::* 27397.
•
On Windows systems, type netstat –anb | find /i "514" and press Enter.
The process running on port 514 displays.
Example output: UDP 127:0:0:1:514
•
On Linux systems, type kill -9 "<PID>" and press Enter.
For example, kill -9 "27397".
•
On Windows systems, type
For example, taskkill /F /PID "3328".
OR
1. Select Ctrl + Shift + Esc to open Windows Task Manager.
2. Click the Processes tab.
3. Click the PID column header to sort the processes by PID.
4. Select the process you want to stop and click End Process.
*:* 3328.
taskkill /F /PID "<PID>"

Syslog troubleshooting

and press Enter.
2
27