Removing An Option From A Device's Shortcut Menu - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

6

Removing an option from a device's shortcut menu

9. Select the tool from the Tool list that you want to launch, or click Define to add a tool.
10. Select the Append device ID check box to specify the parameter used when opening the tool.
11. Click Edit.
12. Click OK to save your work and close the Setup Tools dialog box.
Removing an option from a device's shortcut menu
You can remove a tool that displays on a device's shortcut menu.
To remove an option to the device's shortcut menu, complete the following steps.
1. Select Tools > Setup.
2. Click the Product Menu tab.
3. Select the menu item you want to remove in the Product Popup Menu Items table.
4. Click Remove.
5. Click OK to save your work and close the Setup Tools dialog box.
152
To specify a new tool, refer to
-
To specify that the device's IP address should be used when opening the tool, select the IP
Address option.
-
To specify that the device's Node WWN should be used when opening the tool, select the
Node WWN option.
NOTE
You must click Edit before clicking OK; otherwise, your changes will be lost.
The Setup Tools dialog box displays.
The Product Popup Menu Items table displays all configured menu options.
"Adding a tool" on page 146.
DCFM Enterprise User Manual
53-1001775-01