Configuring a fabric mode Top Talker monitor
NOTE
A fabric mode Top Talker and an end-to-end monitor cannot be configured on the same fabric. You
must delete the end-to-end monitor before you configure the fabric mode Top Talker.
NOTE
A fabric mode Top Talker and an F_port mode Top Talker cannot be configured on the same fabric.
You must delete the F_port mode Top Talker before you configure the fabric mode Top Talker.
To configure a fabric mode Top Talker monitor, complete the following steps.
1. Select the device or fabric on which you want to monitor Top Talker data.
2. Select Monitor > Performance > Top Talkers.
3. Select Fabric to select a switch to monitor in the Top Talker Mode list.
4. Click OK on the Top talker Selector dialog box.
DCFM Enterprise User Manual
53-1001775-01
NOTE
On the 24 - 8 Gbps FC Port, 8 - 10 Gbps CEE Port Switch, Top Talkers is only supported on the
8 Gbps FC Ports.
The Top talker Selector dialog box displays.
FIGURE 114
Top talker Selector dialog box
You can only select one device on which to enable Top Talker.
Top Talker is enabled on the selected device. The Top Talkers - Fabric Mode for Device_Name
dialog box displays.
The Top Talkers - Fabric Mode for Device_Name dialog box displays.
Configuring a fabric mode Top Talker monitor
11
305