Table of Contents
Advertisement
cable config-file
cable config-file
To create a configuration filename for the Cisco CMTS internal CM configuration file, use the cable
config-file command in global configuration mode. To delete the configuration filename, use the no form
of this command.
Syntax Description
filename
Defaults
No default behaviors or values
Command Modes
Global configuration
Command History
Release
12.1(2)EC1
12.2(4)BC1
Usage Guidelines
A DOCSIS CMTS automatically downloads a DOCSIS configuration file to a CM during its initial
registration procedure. The DOCSIS configuration file configures the CM for its network operations and
includes information such as the maximum number of CPE devices that are supported, the quality of
service (QoS) options provided for the CM, and whether the CM should upgrade to a new software
image.
The DOCSIS specification defines the format of the DOCSIS configuration files, which can be created
by any number of tools. In addition to the other tools that Cisco provides for this purpose, the cable
config-file command can be used to create the DOCSIS configuration files needed for your network.
These configuration files are stored in the Flash memory on the Cisco CMTS and can be automatically
downloaded to the CM as needed.
The cable config-file command creates the DOCSIS configuration file if it does not already exist and
then enters config-file configuration mode. You can then give one of the following subcommands to
create the configuration file:
•
•
•
•
•
•
•
Cisco Broadband Cable Command Reference Guide
2-30
cable config-file filename
no cable config-file filename
Specifies the configuration filename to create and edit.
Modification
This command was introduced.
Support for this command was added to the Release 12.2 BC train.
access-denied
channel-id
cpe max
download
frequency
option
privacy
Chapter 2
Cisco CMTS Configuration Commands
OL-1581-08
Advertisement
Table of Contents
