Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 651

Table 103: Summary of DHCP Output Fields (continued)
Field Values
Hardware Vendor identification.
Address
Status State of the client binding.
Address IP address obtained from the DHCP server.
Obtained
Update Indicates whether server update is enabled.
Server
Lease Date and time the lease was obtained.
Obtained
Lease Date and time the lease expires.
Expires
Renew Reacquires an IP address from the server for the
interface. When you click this option, the command
sends a discover message if the client state is INIT
and a renew request message if the client state is
BOUND. For all other states it performs no action.
Release Clears other resources received earlier from the server,
and reinitializes the client state to INIT for the
particular interface.
Conflicts tab
Detection Date and time the client detected the conflict.
Time
Detection How the conflict was detected.
Method
Address IP address where the conflict occurs.
DHCP Statistics
Relay Statistics tab
Packet Displays the number of packet counters.
Counters
Dropped Graphically displays the number of dropped packet
Packet counters.
Counters
Statistics tab
Copyright © 2010, Juniper Networks, Inc.
Chapter 30: Monitoring System Services
Additional Information
Only client-detected conflicts are displayed.
The addresses in the conflicts list remain excluded until
you use the clear system services dhcp conflict
to manually clear the list.
command
547