Outbound-Ssh - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

outbound-ssh

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Copyright © 2010, Juniper Networks, Inc.
[edit system services]
outbound-ssh {
client client-id {
address {
port port-number;
retry number;
timeout seconds;
}
device-id device-id;
keep-alive {
retry number;
timeout seconds;
}
reconnect-strategy (in-order | sticky);
secret password;
services netconf;
}
traceoptions {
file filename <files number> <match regex> <size size> <world-readable |
no-world-readable>;
flag flag;
no-remote-trace;
}
}
[edit system services]
Statement introduced in Junos OS Release 8.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure a router or switch running the Junos OS behind a firewall to communicate with
client management applications on the other side of the firewall.
To configure transmission of the router's or switch's device ID to the application, include
the device-id statement at the
—Identifies the
client-id outbound-ssh
outbound-ssh stanza represents a single outbound SSH connection. This attribute
is not sent to the client.
—Identifies the router or switch to the client during the initiation sequence.
device-id
—(Optional) When configured, specifies that the router or switch send keepalive
keep-alive
messages to the management server. To configure the keepalive message, you must
set both the and
timeout
reconnect-strategy —(Optional) Specify the method the router or switch uses to reestablish
a disconnected outbound SSH connection. Two methods are available:
Chapter 31: Configuration Statements for System Services
[edit system services] hierarchy level.
configuration stanza on the router or switch. Each
attributes.
retry
577