Configuring Access Options On An Infranet Controller User Role - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Configuring Access Options on an Infranet Controller User Role (NSM Procedure)
40
To provide users access to protected resources, you can configure agent and agentless
access for a user role.
To configure access options on a user role:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller device for
2.
which you want to configure the user- role access option.
Click the Configuration tab. In the configuration tree, select Users > User Roles. The
3.
corresponding workspace appears.
Add or open a user role. Click either the Agent or Agentless tab. Add or modify settings
4.
as specified in Table 7 on page 40.
Click one:
5.
OK — Saves the changes.
Cancel — Cancels the modifications.
Table 7: User Role Access Configuration Details
Option Function
Agent tab
Install Agent for Allows the user to
this role install the agent for
this role.
Install Java Agent Allows the user to
for this role download and install
the lightweight Java
agent for Macintosh or
Linux platforms.
Your Action
Select this option to install the agent for this role.
Select this option to install Java agent for this role.
Copyright © 2010, Juniper Networks, Inc.