Sip-Server; Source-Address (Src Software) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

sip-server

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

source-address (SRC Software)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
sip-server [address | name];
[edit system services dhcp],
[edit system services dhcp pool],
[edit system services dhcp static-binding]
Statement introduced in Junos OS Release 10.1 for EX Series switches.
Configure Session Initiation Protocol (SIP) server addresses or names for DHCP servers.
address —IPv4 address of the SIP server. To configure multiple SIP servers, include multiple
options. This address must be accessible by all clients served within a
address
specified range of addresses (based on an address pool or static binding).
name —Fully qualified domain name of the SIP server. To configure multiple SIP servers,
include multiple
name
served within a specified range of addresses (based on an address pool or static
binding).
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring a DHCP SIP Server (CLI Procedure) on page 544
source-address source-address;
[edit system services service-deployment]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable Junos OS to work with the Session and Resource Control (SRC) software.
source-address — Local IPv4 address to be used as source address for traffic to the SRC
server. The source address restricts traffic within the out-of-band network.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the Junos OS to Work with SRC Software
Chapter 31: Configuration Statements for System Services
options. This domain name must be accessible by all clients
591