Pool - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

pool

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
pool address/prefix-length {
address-range {
low address;
high address;
}
exclude-address {
address;
}
}
[edit system services dhcp]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For J Series Services Routers and EX Series switches only. Configure a pool of IP addresses
for DHCP clients on a subnet. When a client joins the network, the DHCP server
dynamically allocates an IP address from this pool.
—Lowest and highest IP addresses in the pool that are available for dynamic
address-range
address assignment. If no range is specified, the pool will use all available addresses
within the subnet specified. (Broadcast addresses, interface addresses, and excluded
addresses are not available.)
—Addresses within the range that are not used for dynamic address
exclude-address
assignment. You can exclude one or more addresses within the range.
The remaining statements are explained separately.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Configuring the Router, Switch, or Interface to Act as a DHCP Server on J Series Services
Routers and EX Series Ethernet Switches
Chapter 31: Configuration Statements for System Services
581