Show Surelink Status For A Specific Ipsec Tunnel; Show Surelink Status For All Openvpn Clients - Digi LR54 User Manual

Hide thumbs Also See for LR54:
Table of Contents

Advertisement

Interfaces
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type :
> show surelink ipsec all
IPsec
------
test
test
test1
test2
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show Surelink status for a specific IPsec tunnel

To show the Surelink status a specific IPsec tunnel, use the
command:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show surelink ipsec tunnel name
tunnel, for example:
> show surelink ipsec tunnel test
IPsec
------
test
test
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show Surelink status for all OpenVPN clients

To show the Surelink status all OpenVPN clients, use the
1. Select the device in Remote Manager and click Actions > Open Console, or log into the LR54
local command line as a user with full Admin access rights.
LR54 User Guide
Test
--------------------
194.43.79.74 (Ping)
194.43.79.75 (Ping)
194.43.79.74 (Ping)
194.43.79.75 (Ping)
Test
--------------------
194.43.79.74 (Ping)
194.43.79.75 (Ping)
Show Surelink status and statistics
Last Response
Status
-------------
------------------
29 seconds
Passed
5 seconds
Passed
21 seconds
Failed
21 seconds
Waiting for result
show surelink ipsec tunnel name
command to show the Surelink status of a specific
Last Response
Status
-------------
------------------
29 seconds
Passed
5 seconds
Passed
show surelink openvpn client all
command:
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tx64

Table of Contents