Table of Contents
Advertisement
Interfaces
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show Surelink status for a specific IPsec tunnel
To show the Surelink status a specific IPsec tunnel, use the
command:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show surelink ipsec tunnel name
tunnel, for example:
> show surelink ipsec tunnel test
IPsec
------
test
test
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show Surelink status for all OpenVPN clients
To show the Surelink status all OpenVPN clients, use the
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type :
> show surelink openvpn all
OpenVPN Client
--------------
test_client1
test_client1
test_client2
test_client2
>
IX10 User Guide
Test
--------------------
194.43.79.74 (Ping)
194.43.79.75 (Ping)
Test
--------------------
194.43.79.74 (Ping)
194.43.79.75 (Ping)
194.43.79.74 (Ping)
194.43.79.75 (Ping)
Show Surelink status and statistics
show surelink ipsec tunnel name
command to show the Surelink status of a specific
Last Response
Status
-------------
------------------
29 seconds
Passed
5 seconds
Passed
show surelink openvpn client all
Last Response
-------------
29 seconds
5 seconds
21 seconds
21 seconds
command:
Status
------------------
Passed
Passed
Failed
Waiting for result
160
Advertisement
Table of Contents
